+86-571-85380632
  中文  |     ENGLISH       

Products

Contact information

+86-571-85380632
info@fantechem.com
Room 448, Floor 4, Building 2, No.8 Juyuan Road,Binjiang District, Hangzhou,Zhejiang,China
Softener Flake FT-628
- Softener flake for textile.
- FT-628 is a polyamide cationic surfactant, can impart fabric with soft and full handle, suitable for softening of cotton and blended yarn.

Key Features and Typical Benefits:

◆ Impart fabric with soft and full handle, very suitable for softening of cotton and blended yarn.
◆ Excellent anti-static performance
◆ Little impact on the shade of treated fabrics.

Properties:

Property

Value

Physical Form

Solid

Appearance

Yellowish or red light flake solid

pH value(1% aqueous solution)

3.0-5.0

Ionic Character

Cationic

Solubleness(10%aqueous solution)

Soluble in water of 70


FT-628 is suitable for natural fibers such as cotton, hemp and other synthetic fiber with exhaustion and padding finishing process.

1. Emulsion preparation:

Dilution ratio: recommend diluting by the ratio of 1:10 and also can be adjusted according to actual needs.
Dilution method: according to the proportion, add two-thirds of the cold water first, then add the softener flake slowly into cold water and stir until soak. After 5-10 min, mixing while heating to about 70 ℃, stop heating, keep the temperature and stir about 45 min, and then add the remaining one third cold water, stir until it below 40 ℃, filter for use. 

2. Padding process:

Dosage: 20-50 g/L( the prepared dilution)
Pick up ratio: 65-85%
Drying: 160℃×1-2 min

3.Exhaustion process:

Dosage: 2-6% (o.w.f) ( the prepared dilution)
Bath ratio: 1:10-20
Temperature: room temperature
Time: 15-30 min
Drying: 160℃×1-2min

4.Garment washing process

Dosage: 2-6% (o.w.f) ( the prepared dilution)
Condition: same as the above exhaustion process
Note: Detailed process should be adjusted according to preliminary tries.

Operating and safety instructions:

1. Recommend preparing other chemicals first when making the working liquid.
2. Strongly recommend using soft water in dilution, if soft water is not available, the stability needs to be tested before making the solution.
3. To ensure the safety, you should review our Material Safety Data Sheets before using this product under special conditions. MSDS is available from Fantechem. Before handling any other products mentioned in the text, you should obtain available product safety information and take necessary steps to ensure safety of use.

Package & Storage:

Woven bag net 25kg, can be stored for 18 months under dry, cool and ventilated condition. Beware of heavy load in order to avoid agglomeration during storage and transportation. To ensure that the product quality is maintained, the woven bag should be tightly sealed when not in use. It should be stored without prolonged exposure to extreme heat and cold condition.

ATTENTION

The above recommendations are based on comprehensive studies conducted in the practical finishing. They are, however, without liability regarding property rights of third parties and foreign laws. The user should test whether the product and the Application: are suited for his very special purposes.

We are, above all, not liable for fields and methods of Application: which have not been put down by us in writing.

Advice for marking regulations and protective measures can be taken from the respective safety data sheet.
 

Inquiry

For inquiries about our products or price offer, please leave your email to us and we will be in touch within 24 hours.