- Leveling agent for textile.
-FT-122K(CONC.) is a special surfactant compound and suitable for high temperature and high pressure of polyester fiber and its blends dyeing process. Especially suitable for polyester micro-fiber and high density fabric dyeing. It has excellent high temperature dispersing stability, can prevent aggregation of dye in the process of dyeing; Excellent retarding ability, in dyeing at low temperature stage; With strong migration ability to ensure that the whole demand for dye migration in dyeing process, improve the effect of leveling; Small decolorization, good dyeing reproducibility.
Key Features and Typical Benefits:
● Excellent retarding ability, can control the initial dyeing rate and improve the dyes compatibility, ensure leveling effect.
● Excellent high temperature dispersing stability to disperse dyes, prevent aggregation in dyeing process.
● Strong migration ability to disperse dyes, ensure the entire dyeing process requirement for dye migration, improve leveling effect.
● Can repair some color defects in high dosage.
● Small decolorization and good dyeing reproducibility.
● Cold water soluble and easy to use.
Properties:
|
Property |
Value |
|
Physical Form |
Liquid |
|
Appearance |
Yellow viscous liquid |
|
Solid Content (%) |
78.0-80.0 |
|
pH value(1% aqueous solution) |
5.0-7.0 |
|
Flash Point(°C) |
>92 |
|
Density ( 25°C),g/cm3 |
0.98-1.08 |
|
Ionic Character |
Anionic/Nonionic |
Application:
FT-122K(CONC.) can be used directly o after dilution (normally the ratio is 1 to 4 or 1 to 6). The most suitable usage shall be based on the fabric, color and process.
Conventional process:
|
TF-212K(CONC.): |
0.2-1.0g/L |
|
Bath ratio: |
1/5-1/15 |
|
Temperature: |
125-130℃ |
|
Time: |
30-60 min |
Note: Detailed process should be adjusted according to preliminary tries.
Operating and safety instructions:
1. It has good stability in water, but when the hardness is greater than 300 ppm, recommend testing the dilution stability before making the solution.
2.When making the solution, avoid auxiliaries mixing with the acid and dyestuff directly. Recommend diluting them respectively, and then charge the dilution to cylinder as required.
3.To ensure the safety, you should review our Material Safety Data Sheets before using this product under special conditions. MSDS is available from Fantechem, Before handling any other products mentioned in the text, you should obtain available product safety information and take necessary steps to ensure safety of use.
Package & Storage:
Plastic drum net 50 kg, can be stored for 12 months under room temperature and hermetic condition without exposure to sunlight. To ensure that the product quality is maintained, please check the period of validity of the product, and should be used up before the validity. The container should be tightly sealed when not in use. It should be stored without prolonged exposure to extreme heat and cold condition.
ATTENTION
The above recommendations are based on comprehensive studies conducted in the practical finishing. They are, however, without liability regarding property rights of third parties and foreign laws. The user should test whether the product and the application are suited for his very special purposes.
We are, above all, not liable for fields and methods of application which have not been put down by us in writing.
Advice for marking regulations and protective measures can be taken from the respective safety data sheet.
中文
ENGLISH